User's Manual

30
Static IP
Internet Connection Type
Select Static IP to begin configuration of the Static IP connection.
Account Name
Enter the account name provided by your ISP.
Domain Name
Enter the domain name provided by your ISP.
MTU
Specify the Maximum Transmit Unit size. It is recommended you accept the default setting of
Auto. Otherwise, packets will be fragmented downstream if the MTU is set too high or too low,
which impacts network performance. In extreme cases, an MTU setting that is too low can
prevent the ECB350 from establishing some connections.
IP Address
Assign an IP address Manually.
IP Subnet Mask
Specify an IP address’s subnet mask.
Gateway IP Address
Specify the gateway of your network.
Primary DNS
Specify the primary DNS server’s IP address.
Secondary DNS
Specify the second DNS server’s IP address.
Discard Ping on WAN
Check to Enable to recognize pings on the ECB350 WAN interface or Disable to block pings on
the ECB350 WAN interface. Note: Pinging IP addresses is a common method used by hackers to
test whether the IP address is valid. Blocking pings provides some extra security from hackers.
Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings.
Note: Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1).