User's Manual

7.4 Wireless MAC Filter

Wireless MAC Filters are used to allow or deny network access to wireless clients according to their MAC addresses. You

can manually add a MAC address to restrict the permission to access ECB350. The default setting is Disable Wireless

MAC Filter.

Note: Only in Access Point, WDS AP and Router mode.

Wireless Filter (Access Point / WDS AP / Router mode)

ACL Mode

Determines whether network access is granted or denied to clients whose MAC addresses

appear in the MAC Address table on this page. Choices are Disable, Deny MAC in the list, or

Allow MAC in the list.

MAC Address

Enter the MAC address of the wireless client.

Add Click Add to add the MAC address to the MAC Address table.

Delete

Delete the selected entries.

Apply

Click Apply to apply the changes.