User's Manual

Data Rate

Select a data rate from the drop-down list. The data rate affects throughput. If you select a low

data rate value, for example, the throughput is reduced but the transmission distance increases.

RTS/CTS Threshold

Specify the threshold package size for RTC/CTS. A small number causes RTS/CTS packets to be

sent more often and consumes more bandwidth.

Distance

Specify the distance between Access Points and clients. Longer distances may drop high-speed

connections.

Aggregation

Merges data packets into one packet. This option reduces the number of packets, but increases

packet sizes.

Wireless Traffic

Shaping

Check this option to enable wireless traffic shaping. Traffic shaping regulates the flow of packets

leaving an interface to deliver improved Quality of Service.

Incoming Traffic Limit

Specify the wireless transmission speed used for downloading.

Outgoing Traffic Limit

Specify the wireless transmission speed used for uploading.

Accept / Cancel Click [Accept] to confirm the changes or [Cancel] to cancel and return previous settings.