User's Manual

66
8 Management
8.1 Administration
This page allows you to change the system password and to
configure remote access. By default, the user name is admin and
the password is: admin. Password can contain 0 to 12
alphanumeric characters and are case sensitive.
Note: Remote Access is only in AP Router and Client Router mode.
Change Password
Name
Enter a new username for logging in to the Web Configurator.
Password
Enter a new password for logging in to the Web Configurator.
Confirm Password
Re-enter the new password for confirmation.
Save/Apply / Cancel Click Save/Apply to apply the changes or Cancel to return previous settings.
Remote Access (only in AP Router and Client Router mode)
Remote Management
Enable or disable remote management.
Remote Upgrade
Specify whether the firmware can be upgraded remotely.
Remote Management Port
If remote management is enabled, enter the port number to be used for remote management.
For example: If you specify the port number 8080, enter http://<IP address>:8080 to access
the device Web Configurator.