User's Manual

8.2 Management VLAN

This page allows you to assign a VLAN tag to the packets. A VLAN is a group of computers on a network whose software

has been configured so that they behave as if they were on a separate Local Area Network (LAN). Computers on VLAN

do not have to be physically located next to one another on the LAN.

Note: Only in Access Point and WDS AP mode.

Management VLAN (Only in Access Point mode)

Management VLAN ID

If your network includes VLANs and if tagged packets need to pass through the Access Point,

enter the VLAN ID. Otherwise, click No VLAN tag.

Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings.

Note:

1. If you reconfigure the Management VLAN ID, you may lose your connection to the ECB350. Verify that the DHCP server supports the

reconfigured VLAN ID and then reconnect to the ECB350 using the new IP address.

2. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1).