User's Manual

68
8.3 SNMP Settings
This page allows you to assign the contact details, location, community name and trap settings for SNMP. This is a
networking management protocol used to monitor network-attached devices. SNMP allows messages (called protocol
data units) to be sent to various parts of a network. Upon receiving these messages, SNMP-compatible devices (called
agents) return data stored in their Management Information Bases.
SNMP
SNMP Enable/Disable
Enable or disable SNMP feature.
Contact
Specify the contact details of the device
Location
Specify the location of the device.
Community Name (Read
Only)
Specify the password for access the SNMP community for read only access.
Community Name
(Read/Write)
Specify the password for access to the SNMP community with read/write access.