Users Manual Part 1

Link: Allows you to enable or disable the connection for this port.
Label: Allows you to add a descriptor for this port.
Speed/Duplex: Allows you to define the following speed/duplex communication settings
for this port:
Auto : Speed/Duplex will auto-negotiate based on the connected node.
1Gbps / Full Duplex
100 Mbps / Full Duplex
100 Mbps / Half Duplex
10 Mbps / Full Duplex
10 Mbps / Half Duplex
Power over Ethernet (PoE): Allows you to power a connected device through an Ethernet
cable using your switch.
VLANs: Allows you to group devices to create a partitioned network on the same LAN.
Isolation : Allows you to configure a port to transmit traffic only to its connected node.
Rate Limit : Allows you to limit the amount of incoming and outgoing traffic in Mbps.