User's Manual
135
Chapter7 | Camera Connecting to Other Router
Normally, you do not need to make any changes to your router setting to be able to use the camera. However, in case if you
experience issues in connecting the camera, you should probably check for the following settings. UPnP, UPnP Traversal and Firewall.
UPnP and UPnP Traversal:
Universal Plug and Play (UPnP) allows the other device to detect the presence of the camera so that communication become
possible. Please ensure that your router supports UPnP Traversal and has it enabled. Most of the modern wireless router today
supports this feature. You should enable UPnP if you wish your camera to be recognized by the home router. If you can’t nd the
related settings, they are most likely enabled by default. UPnP Traversal makes camera remote access over the Internet possible using
camera DDNS name.
Firewall:
By default, the rewall function of the router is not congured to lter out specic trafc. However, in case if you have trouble
accessing the camera view, it’s likely that the trafc has been blocked by the rewall on your router. You may want to double check
whether you have blocked the service ports. Check the camera setting System → Service Port. Make sure you do not block the
following ports: 80, 50000, 554, 50045, 9091 and 50075.