User's Manual
123
Chapter6 | Camera Connecting to EnGenius Gateway/Router
On your gateway’s/router’s Main Menu, Click EnViewer → IP Camera under Cloud Services to access the connected cameras.
Depending on the rmware version of the device, the page may be found on System → IP Camera under Device Management.
You should be see all your cameras listed on the IP Camera Client Table. If not, click Refresh button to scan the network again.
Please be noted that only EnGenius Cameras will be listed on the table.
Note: Only EnGenius Cameras can be managed collectively by EnGenius Gateway/Router. For other vendor’s cameras, you still have
to congure them one by one manually.
Connect: You can get access to the selected camera’s
User Interface Management page.
Add Prole: Add the selected camera to a prole
(please refer to next section for more detail on
Prole)