User's Manual

105
Chapter5 | User Interface
Note: If setting Event Duration to 20 seconds, the camera will keep recording for 20 seconds when an event is triggered. In this case,
if the Video Length is 20 seconds, then 1 le will be generated for instance of event. If Video Length per clipis 10 seconds, then 2
les will be generated event. Please note that pre-alarm and post-alarm will extend the length of the clip for the chosen extra length
of time.
Event Type: Record (movie clip)
Event Settings
Storage Destination: SD Card or Network Storage
Event Duration: the length of time when an event is triggered
Pre-event: Enable or Disable pre-event
Pre-event Buffer: duration: the length of pre-event, 1~3 seconds
Post-event: Enable or Disable post-event
Post-event Buffer: the length of post-event, 1~3 seconds
Event Recording
Video Format: AVI is set
Stream Type: H.264 (1280x720) or H.264 (640x480). The options
may vary as it is the settings of current Stream 1 and Stream 2
Video Length: the maximum video length of time per le
Alarm Audio Play Settings
Play Audio: Enable or Disable the alarm audio through the speaker
when an event is triggered.
Alarm Audio Files: the sound le to be played when alarm is triggered.
Click Play to test.
Click Apply to save the event settings.