User's Manual

32
Chapter3 | Accessing the Camera after Installation
Web Browser
You can use web browser on the management station to access the camera by entering IP address or DDNS of your camera.
DDNS works only if your gateway or router is already connected to the Internet. Please refer to the previous section EnViewer
Finder: EnGenius Cloud Services if you do not know the IP address or DDNS of your camera.
For this example, we have our DDNS and IP address as follows:
DDNS: ooooooo.engeniusddns.com
IP Address: 192.168.0.101
If you are using EnGenius IoT Gateway or Intelligent Router, please proceed to Manage camera over EnGenius Gateway/
Router chapter.
If not, please proceed to First Time Basic Setting chapter for more detail guide on camera initial settings.