User's Manual
7
Chapter1 | Product Overview
The EDS1130 is a Wireless Intelligent Network Camera which adds surveillance capability to the home network environment.
It helps family members and small business owners keep an eye on what matters and get notied by what just happened on demand
allowing around-the-clock monitoring remotely.
It features LED Infrared Night Vision with automatic activation system. Megapixel HD live streaming with high speed H.264
encoding ensures ne quality image recording without losing any details. Infrared Night Vision feature can deliver 24 hours non-stop
monitoring. With the support of EnGenius Cloud service, you can monitor your home remotely at anytime from anywhere on iPhone®,
iPad® and Andorid
TM
-based smartphone and tablet using EnViewer app or on PC via web-based User Interface.
Introduction
This document will guide you through steps in detail for EDS1130 installation and both basic and advanced congurations. Be
familiar with the product features can help you fully utilize the camera for various application scenarios. Please note that the product
features may improve over time, be sure to check out the latest rmware and user manual for most updated changes on EnGenius
website.
Thank you for choosing EnGenius products.
Read Before Using
For users’ convenience, the camera is congured with DHCP enabled by default which allows the camera to get an IP address
for itself automatically. This applies to the majority of the home network settings. However, if you are connecting the product in an
ofce (or any public settings), you may need to consult the IT technician at the MIS department ahead to avoid IP address conict.
Like all electronic devices, do not install the product in hazard environment where humidity or temperature is high to avoid
danger. This camera is designed for indoor usage only, do not expose it directly under the sun and avoid contact with water. In case of
wall-mount installing, secure the camera and wires in place and prevent it from dangling.