User's Manual

2.3.2. Connecting via Wi-Fi Setup
It is recommended that to make initial setup with RJ45 Ethernet cable and then switch to wireless after you have completed all the
settings. However, you can also start wirelessly with WPS mechanism.
Ensure the router supports WPS feature and is enabled. Press the WPS button on both camera and the router at the same time. It may
take up to 90 seconds for the two devices to establish the connection. Make sure you are close enough to the router and ensure the router is
not occupied by heavy traffic or P2P loading.
Please note that there may be differences in WPS between vendors; therefore, if router does not respond to camera connection request
please use RJ45 cable for initial setup and manually configure wireless setting afterwards.