User's Manual

The camera list at the center displays the discovered cameras currently connected to your router (local network). If you do not find the
one you intend to configure, please click on Refresh to rescan the network until it appears on the list. Please turn off any heavy-loading
applications such as P2P that may occupy your network.
Enter Username and Password for the selected camera on the list.
Click on Next to start configuration.
The EnViewer Finder will guide you step by step through the basic settings Network, DDNS and Config. You can also switch between settings by
clicking the icons on the panel.
Rescan the network for camera.
Go to Network setting