User's Manual

BASIC NETWORK SETTINGS PORT MAPPING SETUP
6-81
6.9.2 Port Mapping Setup
Port Mapping allows you to redirect a particular range of service port numbers from the WAN to a particular LAN IP address.
z Enable Port Mapping Click Enable Port Mapping to
activate port mapping.
z Description Enter notes or details about the mapped
port range configuration.
z Local IP Enter the local IP address of the server behind
the NAT firewall.
z Protocol Select the protocol to use for mapping from the
following: TCP, UDP or Both.
z Port Range Enter the range of ports to be forwarded.
Click Add to append a new device to the list or Reset to dis-
card changes.