User's Manual

BASIC NETWORK SETTINGS CONFIGURING LAN
6-5
6.1.2 Configuring LAN
Configure the wired network settings in the LAN section. The router’s IP is defined in the IP Address field. The default set-
ting of the DHCP server is set to enabled so that network clients can be automatically assigned a virtual IP addresses.
Advanced users may configure DNS server settings to meet specific requirements. Changing the settings in this section are
not necessary for most situations.
LAN IP
Note:
Keep the default values if you are uncertain of the settings values.
IP Address Configure the router’s LAN IP address.
IP Subnet Mask Configure the router’s LAN Subnet Mask
802.1d Spanning Tree The 802.1d Spanning Tree settings
is disabled by default. When enabled, the spanning tree pro-
tocol is applied to prevent network loops (transmissions
won’t pass the same node twice to reach the destination).
\