User's Manual

BASIC NETWORK SETTINGS CONFIGURING PPTP
6-19
6.2.5 Configuring PPTP
The point-to-point tunnelling protocol (PPTP) is used in association with virtual private networks (VPNs). There a two parts to
a PPTP connection: the WAN interface settings and the PPTP settings.
WAN Interface Settings
Dynamic IP Address
z WAN Interface Type Select Dynamic IP Address to
assign an IP address provided by an ISP.
z Hostname Enter a host name of an ISP. (optional).
z Clone MAC Enter the MAC address of the devices’ net-
work interface card (NIC) in the MAC address field and
click Clone MAC.
Note:
Some ISP providers require registering the MAC
address of the network interface card (NIC) connected
directly to the cable or DSL modem. Clone MAC
masks the router's MAC address with the MAC
address of the device’s NIC.