User's Manual

This page displays the current status of the Wireless

settings of the ENH1750EXT.

2.4GHz/5GHz Wireless Network

Operation Mode: SelectOperationMode.TheENH1750EXT

supportsthreeOperationModes:AccessPoint,ClientBridge

or WDS (WDS AP, WDS Bridge, and WDS Station).

Wireless Mode: Supports 802.11 b/g/n mixed mode in

2.4GHzand802.11a/nmixedmodein5GHz.

Channel HT Mode: The default channel bandwidth is 20/

40MHz. The larger the channel, the greater the transmission

quality and speed.

Extension Channel: Select upper or lower channel. Your

selection may affect the Auto channel function.

Channel: Select the channel and frequency. You also can

select “Auto” to enable auto-channel selection.

Transmit Power: Sets the power output of the wireless

signal.

Data Rate: Select a data rate from the drop-down list. The

data rate affects throughput of data in the ENH1750EXT.

Select the best balance for you and your network but note

that the lower the data rate, the lower the throughput,

though transmission distance is also lowered.

RTS/CTS Threshold:Speciesthethresholdpackagesize