User's Manual

To attach the ENH1750EXT to a pole using the

provided pole mounting kit:

1. Place the at washers on four screws and drive the

screws to attach the mounting base to the back of the

Access Point.

2. Drive the four round head screws to attach the Pole

Mount Bracket to the mounting base.

3. Thread the open end of the Pole Strap through the two

tabs on the Pole Mount Bracket .

4. Lock and tighten the Pole Strap to secure the Pole Mount

Bracket to the pole.

Note: See diagrams below for vertical and horizonal

placements.

1. 3.2.

horizontal placement horizontal placement horizontal

placement