User's Manual
Table Of Contents
- 1 Product Overview
- 2 Installation
- This chapter describes how to install the ENH210EXT.
- 3 Wireless Network Modes
- 4 Configuring Your Computer for TCP/IP
- 5 Status
- 6 System
- 7 Wireless Configuration
- 8 LAN Setup
- 9 Router Settings
- 10 Management Settings
- 11 Network Configuration Examples
- Appendix A – Troubleshooting
- Appendix B – Specifications
- Appendix C – Glossary
- Appendix D – Statements of Conformity
3.5 Client Router Mode
In Client Router Mode, the ENH210EXT provides two functions: 1) acting as a
wireless-Ethernet Bridge in order to relay signal from the access point; 2) acting as an active
DHCP server that allows WLAN clients to share the same wireless network connection. Ideally,
have clients wirelessly connect to an AP/WISP and connect to LANs via Ethernet. Client Router
Mode is different from the AP Router Mode. It is not a common application however useful
when connects to WISP AP.