User's Manual
Table Of Contents
- 1 Product Overview
- 2 Installation
- This chapter describes how to install the ENH210EXT.
- 3 Wireless Network Modes
- 4 Configuring Your Computer for TCP/IP
- 5 Status
- 6 System
- 7 Wireless Configuration
- 8 LAN Setup
- 9 Router Settings
- 10 Management Settings
- 11 Network Configuration Examples
- Appendix A – Troubleshooting
- Appendix B – Specifications
- Appendix C – Glossary
- Appendix D – Statements of Conformity
permission’s of the client. The default setting is Disable Wireless MAC Filters.
0.
ACL Mode ACL Mode can deny or allow specific clients to access the
network. Select Disable, Deny MAC in the list, or Allow MAC in
the list from the drop down list.
MAC Address Filter Specify the MAC address, manually.
Add Press Add to add the MAC address in the table.
Apply Press Apply to apply the changes.
7.5 WDS Link Settings
WDS Link Settings is used to establish a connection between Access Points without forgoing
Access Point functionality. APs with WDS functionality can extend the wireless coverage and
allow LANs to communicate with each other.