User's Manual
Table Of Contents
- 1 Product Overview
- 2 Installation
- This chapter describes how to install the ENH210EXT.
- 3 Wireless Network Modes
- 4 Configuring Your Computer for TCP/IP
- 5 Status
- 6 System
- 7 Wireless Configuration
- 8 LAN Setup
- 9 Router Settings
- 10 Management Settings
- 11 Network Configuration Examples
- Appendix A – Troubleshooting
- Appendix B – Specifications
- Appendix C – Glossary
- Appendix D – Statements of Conformity
8.1 IP Settings
This section is only available for Non-Router Mode. IP Settings allows you to configure the IP
settings of the ENH210EXT.
IP Network Setting Select Radio button for Obtain an IP address automatically or
Specify an IP address.
IP Address Specify LAN port IP address.
IP Suet Mask Specify Subnet Mask.
Default Gateway Specify Default Gateway.
Primary DNS Specify Primary DNS.
Secondary DNS Specify Secondary DNS.
Accept / Cancel Press Accept to confirm the changes or Cancel to return
previous settings.
Please make note of the following:
1. Obtain an IP address automatically is not a DHCP server. This setting allows the
ENH210EXT to automatically request an IP address when it is connected to a device
which has a DHCP server.
2. Changing LAN IP Address will change LAN Interface IP address. The webpage will
automatically redirect to the new IP address after Apply is selected.