User's Manual

To attach the ENH710EXT to a pole using the

provided pole mounting kit:

1. Placethelockandatwashersonthefourhexcapscrews

and drive the screws to attach the bracket to the back of

the Access Point.

2. Drive the four round head screws to attach the Pole

Mount Bracket to the bracket.

3. Thread the open end of the Pole Strap through the two

tabs on the Pole Mount Bracket .

4. Lock and tighten the Pole Strap to secure the Pole Mount

Bracket to the pole.

Note: See diagram below for vertical and horizonal

placements.

vertical placement

2 43

horizontal placement