User Manual

BASIC NETWORK SETTINGS WDS BRIDGE MODE
4-27
WDS Bridge Mode
Unlike traditional bridging. WDS Bridge Mode allows you to create large wireless networks by linking several wireless access points
with WDS links. WDS is normally used in large, open areas, where pulling wires is cost prohibitive, restricted or physically impossible.
Wireless Mode Wireless mode supports 802.11b/g/n mixed
modes.
Channel HT Mode The default channel bandwidth is 40 MHz.
The larger the channel, the better the transmission quality and
speed.
Extension Channel Select upper or lower channel. Your
selection may affect the Auto channel function.
Channel / Frequency Select the channel and frequency
appropriate for your country’s regulation.
Click Accept to confirm the changes or Cancel to cancel and
return previous settings.
Security Select the type of WDS security: WEP or AES.
WEP Key Enter the WEP key.
AES Pass phrase Enter the AES pass phrase.
MAC Address Enter the MAC address of the Access Point to
which you want to extend wireless connectivity.
Mode Select Disable or Enable to disable or enable WDS.
Click Accept to confirm the changes or Cancel to cancel and
return previous settings.