User Manual

BASIC NETWORK SETTINGS CONFIGURING WDS LINK SETTINGS
4-40
4.4.4 Configuring WDS Link Settings
Using WDS Link Settings, you can create a wireless backbone link between multiple access points that are part of the same wireless
network. This allows a wireless network to be expanded using multiple Access Points without the need for a wired backbone to link
them, as is traditionally required.
Security Select the type of WDS security: WEP or AES.
WEP Key Enter the WEP key.
AES Passphrase Enter the AES passphrase.
MAC Address Enter the MAC address of the Access Point to
which you want to extend wireless connectivity.
Mode Select Disable or Enable to disable or enable WDS.
Click Accept to confirm the changes or Cancel to cancel and
return previous settings.
Note:
The Access Point to which you want to extend wireless connectivity
must enter the ENS200’s MAC address into its configuration. For
more information, refer to the documentation for the Access Point. Not
all Access Point supports this feature.