User Manual

BASIC NETWORK SETTINGS CONFIGURING SNMP
4-46
4.5.3 Configuring SNMP
SNMP is used in network management systems to monitor network-attached devices for conditions that warrant administrative atten-
tion.
SNMP Enable or disable the ENS200 SNMP function.
Contact Enter the contact details of the device.
Location Enter the location of the device.
Community Name (read only) Enter the password for
accessing the SNMP community for read-only access.
Community Name (read/write) Enter the password for
accessing the SNMP community for read and write access.
Trap Destination Address Enter the IP address where SNMP
traps are to be sent.
Trap Destination Community Name Enter the password of
the SNMP trap community.