User Manual

BASIC NETWORK SETTINGS DYNAMIC IP
4-13
ENS200 WAN interface. Note: Pinging IP addresses is a common method used by hackers to test whether the IP address is valid.
Blocking pings provides some extra security from hackers.
Click Accept to save the settings or Cancel to discard changes.
Dynamic IP
Dynamic IP addressing assigns a different IP address each time a device connects to an ISP service provider. The service is most
commonly used by ISP cable providers.
Account Name Enter the account name provided by your ISP
Domain Name Enter the domain name provided by your ISP
MTU The maximum transmission unit (MTU) specifies the
largest packet size permitted for an internet transmission. The
factory default MTU size for static IP is 1500. The MTU size can
be set between 512 and 1500.
Get Automatically From ISP Click the radio button to obtain
the DNS automatically from the DHCP server.
Use These DNS Servers Click the radio button to set up the
Primary DNS and Secondary DNS servers manually.
Discard Ping on WAN Check to Enable to recognize pings on
the ENS200 WAN interface or Disable to block pings on the
ENS200 WAN interface. Note: Pinging IP addresses is a
common method used by hackers to test whether the IP
address is valid. Blocking pings provides some extra security
from hackers.
Click Accept to save the settings or Cancel to discard
changes.