User Manual

BASIC NETWORK SETTINGS POINT-TO-POINT TUNNELLING PROTOCOL (PPTP)
4-16
Point-to-Point Tunnelling Protocol (PPTP)
The point-to-point tunnelling protocol (PPTP) is used in association with virtual private networks (VPNs). There a two parts to a PPTP
connection: the WAN interface settings and the PPTP settings.
MTU Enter the maximum transmission unit
(MTU). The MTU specifies the largest packet
size permitted for an internet transmission
(PPPoE default: 1492). The MTU size can be set
between 512 and 1492.
IP Address Enter the router’s WAN IP address.
Subnet Mask Enter the router’s WAN subnet IP address.
Default Gateway Enter the router’s WAN gateway IP address.
PPTP Server Enter the IP address of the PPTP server.
Username Enter the username provided by your ISP.
Password Enter the password provided by your ISP.
Connect on Demand If you want the ENS200 to end the
Internet connection after it has been inactive for a period of
time, select this option and enter the number of minutes you
want that period of inactivity to last.