User's Manual

17
1. Remove the rear bottom panel.
2. Connect one end of the Ethernet cable into the main
LAN port (PoE) of the Access Point and the other end to
the AP Ethernet port on the PoE Adapter.
3. Connect the Power cord to the PoE Adapter and plug
the other end in to an electrical outlet.
4. Connect the second Ethernet cable into the LAN port of
the PoE Adapter and the other end to the Ethernet port
on the computer.
5. Place the panel back into device
Note: TheEnStationACv2shouldONLYbepoweredvia
Ethernet cable connected to included supports both IEEE
802.3atPoE(PoweroverEthernet)ortheincludedPoE
Adapter. You may use either one as the power source.
Do NOT use both at the same time.
Note: TheEnStationACv2cansupplythe802.3afpower
source when used with included PoE Adapter.
Hardware Installation
EnStation5-ACv2/EnStationACv2
Ethernet
PC
Power
Outlet
PoE Adapter