Manualshelf

User's Manual

ManualsBrandsEnGenius Technologies ManualsComputers & AccessoriesOutdoor Long Range Wireless Access Point
21222324252627282930
21
1. Connect one end of the Ethernet cable into the LAN port
(PoE) of the AP/ Bridge and the other end to the PoE
port on the PoE adapter.
2. Connect the Power cord with the PoE Adapter and plug
the other end into an electrical outlet.
3. Connect the second Ethernet cable into the LAN port of
the PoE adapter and the other end to the Ethernet port
on the computer.
4. Screw on the provided antennas to the top of this device.
Note: The AP/Bridge should ONLY be powered via
Ethernet cable connected to the included PoE Adapter.
Thisdiagramdepictsthehardwareconguration.
Note: The AP/Bridge should ONLY be powered via
Ethernet cable connected to the included PoE Adapter.
Hardware Installation
ENS500-ACv2/ENS500EXT-ACv2