User's Manual

To attach the ENS500-ACv2/ENS500EXT-ACv2

to a wall using wall mounting kit.

A. Determine where the Access Point to be placed and

stick the Adhesive label on the surface.

B. Usetheappropriatedrillbittodrilltwo8.1mm

diagram and 26mm depth holes on the markings of the

label.

C. Remove the label and screw the anchors unto the holes

untiltheyareushwiththewall.

D. Screw the included screws into the anchors. Place the

Access Point against wall with the mounting screw heads.

To attach the ENS500EXT-ACv2 to a pole using

the provided pole mounting kit:

A. Thread the open end of the Pole Strap through the two

tabs on the Pole Mount Bracket.

B.Lock and tighten Pole Strap to secure Pole Mount Bracket

to the pole.