User's Manual

BeforestartingtocongurethisAccessPoint,youmayrealizetheusedscenarioundervariedoperatingmodes.The

EnStation5-ACv2/EnStationACv2/ENS500-ACv2/ENS500EXT-ACv2isbuiltinEnGeniusEnJetsolution,APcantransmit

datamoreefciently,avoidcollisions,andreducelatencyandpacketlosses.WhenEnJetenable,itcanbeconguredasan:

AccessPoint,ClientBridgeorWDS(AP&Station)orAccessPoint,ClientBridgeorWDS(AP,Station&Bridge)whenEnJet

disable. This chapter describes purpose of different operating modes and lists down the operating modes for outdoor

Access Points or Client Premise Equipments (CPE).

Access Point Mode

InAccessPointMode,AP/CPEbehaveslikesacentralconnectionforstationsorclientsthatsupportIEEE802.11ac/a/nnetworks.

ThestationsandclientsmustbeconguredtousethesameSSID(ServiceSetIdentier)andsecuritypasswordtoassociate

withtheEnStationAC.TheEnStationACsupportsuptoeight(8)SSIDsperbandatthesametimeforsecureaccess.