User's Manual

30
WDS Bridge Mode
InWDSBridgeMode,theAP/CPEcanwirelesslyconnectdifferentLANsbyconguringtheMACaddressandsecurity
settingsofeachAP/CPEdevice.UsethismodewhentwowiredLANslocatedasmalldistanceapartwanttocommunicate
witheachother.ThebestsolutionistousetheAP/CPEtowirelesslyconnecttwowiredLANs,asshowninthefollowing
diagram.
WDSBridgeModecanestablishuptofourWDSlinks,creatingastar-likenetwork.
Note: WDS Bridge Mode does not act as an Access Point. Access Points linked by WDS are using the same frequency
channel. More Access Points connected together may lower throughput.
AP
WDS Bridge
AP
WDS Bridge-
AP
WDS Bridge-
Client
Computer
Client
Computer
Client
Computer