User's Manual

42
This page displays the current status of the Wireless
settings of the AP/CPE.
Wireless Network
EnStation5-ACv2/EnStationACv2/ENS500-ACv2/
ENS500EXT-ACv2 Wireless: The AP/CPE supports
802.11ac/nmixedmodein5GHz.
Operation Mode: Select Operation Mode. When EnJet
enable,The AP/CPE can be seted as Access Point,Client
BridgeorWDS(AP&Station)orAccessPoint,ClientBridge
orWDS(AP,Station&Bridge)whenEnJetdisable.
Channel HT Mode: The default channel bandwidth is 20
MHz/40/80MHz.Thelargerthechannel,thegreaterthe
transmission quality and speed.
Channel: Click Configuration button to open a new
windows to configure channels for performing wireless
service.
Transmit Power: Sets the power output of the wireless
signal.
Bit Rate: 5GHzisdefault6Mbps,therangecancontrol
by BAR via scroll from 6Mbps to 54Mbps.
Client Limits:WhenEnJetenable,limitsthetotalnumber
ofclients.Oncesettingtheceilingofclientnumbers,the
maximum assocaited client devices will be restricted at
this number.
AP Detection: AP Detection can select the best channel to