User's Manual

49
Guest Network Settings
Adding a guest network when EnJet disable allows
visitorstousetheInternetwithoutgivingoutyourofce
or company wireless security key. You can add a guest
network to each wireless network in the 5 GHz ac/a/n
frequencies.
SSID:SpeciestheSSIDforthecurrentprole.
Suppressed SSID: Check this option to hide the SSID from
clients.Ifchecked,theSSIDwillnotappearinthesitesurvey.
Station Separation: Click the appropriate radio button to
allow or prevent communication between client devices.
IP Address: The IP Address of this device.
Subnet Mask: The IP Subnet mask of this device.
Starting IP Address: TherstIPAddressintherangeof
the addresses by the DHCP server.
Ending IP Address: The last IP Address in the range of
addresses assigned by the DHCP server.
RSSI Threshold
RSSI Threshold: Enable the Fast Handover feature when
EnJet disable by ensuring that each client is served by
at least one Access Point at any time. Access Points
continuously monitor the connectivity quality of any
clientintheirrangeandefcientlysharethisinformation
with other Access Points in the vincinity of that client to
coordinate which of them should serve the client best.
RSSI: EntertheRSSI (Received Signal Strength Index) in
order to determine the handover procedure which the
current wireless link will terminate. RSSI is an indication of
thepowerlevelbeingreceivedbytheantenna.Therefore,
thehighertheRSSInumber,thestrongerthesignal.