User's Manual Part 1

31
This page displays the current status of the Wireless
settings of the EnStationAC.
Wireless Network
Operation Mode: Select Operation Mode.TheENH220EXT
supports multi-operation modes: Access Point, Client
Bridge,orWDS(WDSAP,WDSBridge,andWDSStation).
Wireless Mode: Supports802.11ac/a/nmixedmodein5
GHz.
Channel HT Mode: The default channel bandwidth is 20
MHz/40/80MHz.Thelargerthechannel,thegreaterthe
transmission quality and speed.
Extension Channel: Select the upper or lower channel.
YourselectionmayaffecttheAutochannelfunction.
Channel: Select the approriate channel and frequency.
Select Auto to enable auto-channel selection.
Transmit Power: Sets the power output of the wireless
signal.
Data Rate: Select a data rate from the drop-down list. The
data rate affects throughput of data in the EnStationAC.
Select the best balance for you and your network but note
that the lower the data rate, the lower the throughput,
though transmission distance is also lowered.
RTS/CTS Threshold:Speciesthethresholdpackagesize
for RTC/CTS. A small number causes RTS/CTS packets to be
sent more often and consumes more bandwidth.
Client Limits: Limits the total number of clients.
Aggregation: Merges data packets into one packet. This
option reduces the number of packets, but also increases
packetsizes.