Network Router User Manual

ESR-9710 Wireless N Gigabit Router Version 1.0
67
 Current Router Time: Displays the current time on the device.
 Time Zone: Select your time zone from the drop-down list.
 Enable Daylight Saving: Place a check in this box to enable daylight savings time.
 Daylight Saving Offset: Select the offset from the drop-down list.
 Daylight Saving Date: Select the daylight savings date from the drop-down list.
Select the starting and ending times for the change to and from daylight saving time.
For example, suppose for DST Start you select Month="Oct", Week="3rd",
Day="Sun" and Time="2am". This is the same as saying: "Daylight saving starts on
the third Sunday of October at 2:00 AM."
 Enable NTP Server: Place a check in this box if you would loike to synchronize the
device’s clock to a Network Time Server over the Internet. If you are using schedules
or logs, this is the best way to ensure that the schedules and logs are kept accurate.
 NTP Server Used: Specify the NTP server or select one from the drop-down list.
 Set the Date and Time: Select a date and time from the drop-down list or do to use
computer’s time and date click on the Copy Your Computer’s Time Settings button.
 Click on the Save Settings button once you have modified the settings.
6.4.2 System
 Click on the System link in the navigation menu. This page allows you to reboot the
device using the current settings or restore all the settings to the factory defaults.
6.4.2.1 Save Configuration to a File
 This option allows you to save the current configuration of the device into a file. Click
on the Save Configuration button to begin.
 Save the file on your local disk by using the Save or Save to Disk button in the
dialog box.