User's Manual

1. Connect one end of the Ethernet cable into the LAN port

of the Access Point and the other end to the Ethernet

port on the computer.

2. Connect a Power cord with the PoE Adapter and plug

the other end into an electrical outlet.

3. Connect the second Ethernet cable into the LAN port of

this PoE Adapter and the other end to the Ethernet port

on the computer.

Note1: The Access Point can be powered by 802.3af/at

PoE(PoweroverEthernet).Youcanconsidertoadopt

EnGenius EPA5006GP or EPA5006GAT for powering up

your11AXdevice.

Note2: EWS357AP can be driven by IEEE 802.3af and .

EWS377APshouldbedrivenbyIEEE802.3at.

Hardware Installation