User's Manual

17
Re: Proper grounding is very important to protect the base station from
the external noise and to reduce the risk of electrocution in the
event of a lightning strike.
Notes:
Recommended phone line features from the local phone company:
Multiple phone lines “hunt group” is a useful feature and works well with
this phone system. This feature “ties” multiple phone lines to a single
phone number. When an outside caller calls this common phone number,
the phone company automatically finds a free line. In a hunt group, the
Call Waiting and the Caller ID with Call Waiting (or called Type II Caller ID)
features are unnecessary because a 2
nd
call will come in on a separate line,
rather than on the same line. For a 2
nd
call coming in on a separate line,
the phone system’s built-in Call Waiting feature will alert the user and
allow the user to toggle between 2 lines.
Multi
-
base setups
:
EnGenius DuraFon PRO has the capability to expand the coverage or
capacity.
Re: For best performance, maintain a distance of at least 10 meters
(about 30 feet) between any
two base
stations.

Expanding coverage
:
Parallel connects all L1/L2/L3/L4 in each base as below schematic(up
to 8 bases), the use coverage will be several times increased.
Note: Telephone calls cannot be handed off between base units.
Re : when a call is coming in from L1, all handsets can pick up the
call, as long as the handsets are in the coverage of base1~3.
Legacy
PBX
1
Base-1
Base
-
2
Base
-
3
2
3
4
1
2
3
4
1
2
3
4
18
1. Handset Registration.
a. Press REG button on Base 00(default), four LEDs will light up in
setting mode
b. Handset operation: Press MENU 6  1 . (It will complete the
registration process)
c. Repeat, as needed, to add handsets
Note: Additional handsets should be added to the system before
adding additional base units.
2.
Establishing additional Base Units:
a.
Press REG button on new Base.
b.
Use Handset 10 or 11 to Add base :
Press
M
ENU

8

1
c.
Enter 01~07 (base ID)
d.
Repeat, as needed, to add base units
Notes:
1. Only Handset 10, 11 can assign Base ID.
2. Base 00 is a primary base. All handsets must register only on Base 00.

Expanding capacity
User capacity can be
increased by adding
additional base units.
Up to 8 base units can be supported.

10
Select Mode:
1. Add Base

10
Added Base
Number : **
CANCEL
Legacy
PBX
1
Base-1
Base-2 Base-3
2
3
4
1 2 3
4
1 2 3 4