User's Manual

~
33
~
Walkie-Talkie Mode
Channel :
1
2
10
End/PTT
To save and exit
MODE
Frequency:
1
2
10
End/PTT
To save and exit
0
2
10
End/PTT
To save and exit
Code:
Up/Down or number
to select Channel 1~5
Up/Down or numbers
To select Frequency
number 1~56
Up/Down or numbers
To select Code 0~121
MODE
MODE
2
10
End/PTT
To save and exit
Mic. Gain:
MODE
MODE
Up/Down or number
To select microphone gain
3= High sensitivity
2= Medium sensitivity (default)
1= Low sensitivity, for noise
enviornments
2
10
VOX :
Off
End/PTT
To save and exit
Up/Down
To select VOX sensitivity
Off = Deactivate VOX (default)
High = High sensitivity
Medium = Medium sensitivity
Low = Low sensitivity, for noise
enviornments
REDIAL MENU
2
10
DuraFon PRO
1
FREQ
MODE
2
10
Scan Channel
Off
End/PTT
To save and exit
Up/Down
To select the channel to be scan
Off = Deactivate scan (default)
1
Right soft key
To activate/deactivate the scan action
2
~
34
~
1
.
Press
“
Mode
”
key to program Walkie
-
Talkie mode
a. Press Up/Down key to scroll the channel selection, Channel 1 to 5 used for
UHF band, channel 6 used for digital band.
b. Press Mode key to enter the desired frequency number setting. You can
enter number key directly (1~56), or use up/down key to scroll the
frequency number
.
c. Press Mode key to enter the desired Code number setting. You can enter
number key directly (0~121), or use up/down key to scroll the code
number.
d. Press Mode key to set the desired microphone gain setting. Use up/down
key to scroll the gain level(1-3).
3= High sensitivity
2= Medium sensitivity (default)
1= Low
sensitivity
,
for noisy
environme
nts
e. Press Mode key to select VOX sensitivity setting which is only used for
headset only. Use up/down key to scroll the VOX activate gain level(1-3).
3= High sensitivity
2= Medium sensitivity
1= Low sensitivity, for noisy environments
O
ff= Deactivate
VOX(default)
f. Press Mode key to enter the scan channel setting
Use up/down key to scroll the desired channel.
Use left key to activate/deactivate the scan. “Off” display on the right side
means to deactivate the scan (default).
2. Press “End” or “PTT” key to store and exit the Walkie-Talkie programming
mode
Advanced Operations
Handset Registration (Register to PRO base only)
1. When 1
st
time using the handset, you need to register the handset to the base
station (Th
e handset ID is 00 before registering to the base station) .
2. In certain situations, you may want to change a handset’s ID. For example,
you want to change a particular handset from a user to an administrator (ID 10
or 11), or vice versa. Or in some rare occasions, you find another handset
having the same Handset ID
.
3.
Registration
a.
Press MENU
-
6 to enter the registration mode
b.
Press and hold the base’s Registration (
REG
) button for 2 seconds un
til the