Installation Instructions

Quick Installation Guide

EnGenius Europe | Veldzigt 28, 3454 PW De Meern,

Netherlands | 0900-WIFIABC | www.wiabc.com

Disclaimer: Information may be subject to changes without prior notication.

https://www.linkedin.com/company/engeniuseurope

https://plus.google.com/+EngeniusEuropeBVDeMeern

https://www.youtube.com/user/engeniuseuropebv

https://twitter.com/engeniuseu

EDS1130

D. Press and hold the WPS button on the back of your camera for 1~5 seconds

and the Wi-Fi LED wil start blinking frequently. When the connectivity is

complete, the Wi-Fi LED will become solid green.

The proccess may take up to 1 minute.

Setup EnViewer Finder (PC-based Wizard for local network)

The EnViewer Finder is the setup wizard assisting you to configure the camera

connected to your home network (LAN).

A. Select and run the EnViewer Finder from the included CD. Follow the

instruction to complete the installation. The wizard will search all the camera

within your home network.

B. Select the target camera from the list.

C. Enter the username and password of the camera on the top right corner. The

default value of both username and password is admin.

D. Click next to log in.

E. The wizard will guide you to complete the camera settings step by step.

Network: Set up IP address, select your timezone in ‘System time’-section and

confirm ‘Administrator’-settings. Note: Please note the DHCP IP given by the

gateway/router or you can select the manual mode to assign a fixed IP for the

camera.

Cloud service: You can give an alias for your personal DDNS domain that is

easy to remember and to share with others in the future.

Config: Set up the video resolution, compression codec and maximum.

F. Once you finish all the settings in the Config page, ensure that “Check Live

View now” is ticked.