Operation Manual

PVID

When an Untagged packet enters a Switch port, the PVID

(PortVLANID)willbeattactedtotheuntaggedpacketand

forwardedtoaVLANspeciedIDpartofthePVID.

Note: To enable PVID functionality, the following

requirements must be met:

• AllportsmusthaveadenedPVID.

• Ifnoothervalueisspecied,thedefaultVLANPVIDisused.

• Ifyouwanttochangetheport’sdefaultPVID,youmustrst

create a VLAN that includes the port as a member.

Port: Shows the port number.

Trunk:Showsthetrunknumber(ifanyaredenedforthis

port).

PVID: Select one or more ports and then click here to select

a PVID.

Apply: Click APPLY to update the system settings.