Operation Manual

5
Maximum data rates are based on IEEE 802.3ab standards. Actual throughput and range may vary depending on distance between devices or trac and bandwidth load in the network.
Features and specications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright
©2013 EnGenius Technologies, Inc. All rights reserved. Compliant with FCC - This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.
The EGS Smart Switch Series are smart switch devices
specially designed to support Access Points and IP
Surveillance cameras, VOIP phones, and other PoE-Capable
. devices as well as other Ethernet-based networking
equipments or computers.The Smart Switch Series provide
simple, yet powerful PoE manageability with features
such as: IEEE 802.3af or IEEE 802.3at/af ports, PoE port
management, loopback detection, and IGMP snooping.
Package Contents
Your EGS Smart Switch package will contain the following
items*
• EnGenius Switch
• QuickInstallationGuide
• PowerAdapter(EGS2108P&EGS2110P)
• WallMountKit(EGS2108P&EGS2110P)
• GroundScrewKit(EGS2108P&EGS2110P)
Introduction
• PowerCord(EGS5110POnly)
• RackMountKit(EGS5110POnly)
*(allitemsmustbeinpackagetoissuearefund):