Installation Instructions

ManualsBrandsEnGenius ManualsComputer equipmentEGS7228FP

Quick Installation Guide

EnGenius Europe | Veldzigt 28, 3454 PW De Meern,

Netherlands | 0900-WIFIABC | www.wiabc.com

Disclaimer: Information may be subject to changes without prior notication.

https://www.linkedin.com/company/engeniuseurope

https://plus.google.com/+EngeniusEuropeBVDeMeern

https://www.youtube.com/user/engeniuseuropebv

https://twitter.com/engeniuseu

EGS7228FP

Introduction

Power-over-Ethernet (PoE) technology brings new capability and device

expansion to network deployments. IP cameras, indoor wireless access points,

VoIP (Voice-over- IP) phone systems and many other client devices are capable of

receiving their Power-over-Ethernet cabling. These EnGenius switches

provide management with tools to configure and control the network through its

simple web-based Graphical User Interface (GUI).

Unpacking

Open the shipping carton and carefully unpack its contents. Please consult the

packing list below to make sure all the items are present and undamaged. Please

note that the model you have purchased may appear slightly different. If any item

is found missing or damaged, please contact your local EnGenius reseller for

replacement.

Package content

- EnGenius switch

- Quick Installation Guide

- Rj-45 console cable

- Rack mount kit

Before you connect

- Do not place heavy objects on the switch.

- Do not expose the switch to direct sunlight.

- Make sure that there is adequate space (at least 2 inches) for proper heat

dissipation around the switch.

Please do not cover the ventilation holes on all sides of the switch.

- Install the switch in a fairly cool and dry environment.

- Install the switch in a site free from strong electromagnetic source.

- Visually inspect the power jack and make sure that it is fully secured to the

power adapter.

Switch installation

Installing the switch on a flat surface

Install the switch on a flat surface such as a desktop or shelf, attach the rubber feet

on the bottom at each corner of the switch. The rubber feet cushion the switch from

shock or vibration, and secure space between devices when stacking.

Rack installation

To mount the switch onto a rack, attach the included rack mounting brackets to the

switch. Then secure the mounting brackets to the rack. The switch can be mounted

in an EIA standard size, 19-inch rack, which can be placed in a wiring closet with

other equipement.

Summary of content (3 pages)

PAGE 1
EGS7228FP Introduction Power-over-Ethernet (PoE) technology brings new capability and device expansion to network deployments. IP cameras, indoor wireless access points, VoIP (Voice-over- IP) phone systems and many other client devices are capable of receiving their Power-over-Ethernet cabling. These EnGenius switches provide management with tools to configure and control the network through its simple web-based Graphical User Interface (GUI).
PAGE 2
EGS7228FP Connecting the switch Connecting the devices to the switch and managing the switch using a web browser. Step 1: Connect the supplied power cord to the switch and plug the other end into an electrical outlet. Verify the Power LED indicator is lit on the switch. Quick Installation Guide Step 5: If your computer is already on a network, ensure that you have set it to a Static IP adress on the interface. (Example: 192.168.0.10 and the subnet mask address as 255.255.255.
PAGE 3
EGS7228FP Quick Installation Guide Note: Maximum data rates are based on IEEE 802.3an standards. Actual throughput and range may vary depending on distance between devices or traffic and bandwidth load in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. Copyright ©2013 EnGenius Europe, Inc. All rights reserved.