Installation Instructions

Quick Installation Guide

EnGenius Europe | Veldzigt 28, 3454 PW De Meern,

Netherlands | 0900-WIFIABC | www.wiabc.com

Disclaimer: Information may be subject to changes without prior notication.

https://www.linkedin.com/company/engeniuseurope

https://plus.google.com/+EngeniusEuropeBVDeMeern

https://www.youtube.com/user/engeniuseuropebv

https://twitter.com/engeniuseu

ENS1200

ENS1200 setup

1. To configure the ENS1200, open a web browser (example: Microsoft Internet

Explorer, Mozilla Firefox, Google Chrome, etc.)

2. In the adress bar of the web browser, enter: 192.168.1.1 (the default IP

address of the ENS1200) and hit ENTER.

3. A login screen will appear. By default, the username of the ENS1200 is

admin and the password is admin. Enter the current username and password

of the ENS1200 and then click ‘Login’. Refer to the ENS1200 user manual on

how to change the username and password.

4. After clicking ‘Login’ with the correct username an password, the ENS1200

main menu will appear. If you are successful, proceed to setting up the wireless

connection.

Switching between operating modes

This device can operate in the following modes: Access point, Client bridge,

WDS AP, WDS bridge, WDS station and Client router.

A. Click on the ‘operation mode’ link under the system navigation drop-down

menu.

B. Operating mode: Select an operating mode from the list (Access point, Client

bridge, WDS AP, WDS bridge, WDS station or Client router) and then click on

the ‘Apply’ button.

C. All basic setup is completed. Note: The wireless connection is not secure. To

setup security on the ENS1200, refer to the ENS1200 user manual.