User guide

BASIC NETWORK SETTINGS CONFIGURING SNMP
4-42
4.5.3 Configuring SNMP
SNMP is used in network management systems to monitor network-attached devices for conditions that warrant administrative atten-
tion.
SNMP Enable or disable the ENS200 SNMP
function.
Contact Enter the contact details of the device.
Location Enter the location of the device.
Community Name (Read Only) Enter the
password for accessing the SNMP community for
read-only access.
Community Name (Read/Write) Enter the
password for accessing the SNMP community for
read and write access.
Trap Destination Address Enter the IP address
where SNMP traps are to be sent.
Trap Destination Community Name Enter the
password of the SNMP trap community.
SNMPv3 Enable or Disable the SNMPv3 feature.
User Name Specify the username for SNMPv3.
Auth Protocol Select the authentication protocol type: MD5 or SHA.
Auth Key (8-32 Characters) Specify the authentication key for authentication.
Priv Protocol Select the privacy protocol type: DES.
Priv Key (8-32 Characters) Specify the privacy key for privacy.