Datasheet

Technical Specications
Hardware
RF: 2.4 GHz Frequency Band
Memory: 64MB
Flash: 16MB
Antenna
External/detachable 5 dBi Omni-directional Antenna
Physical Interface
2 x RJ-45 Fast Ethernet (10/100 Mbps)
1 x Reset Button
Power Requirements
- Active Ethernet (Power-over-Ethernet)
- Proprietary PoE design
- Power Adapter (United States) 24V / 0.6A
RF Specication
Frequency Band
2.4 GHz
Based on Wireless N technology
Data rate
Up to 150 Mbps
Software
Operation Modes
Access Point / Client Bridge / Client Router / WDS
Wireless/Network
Auto Channel Selection
Distance Control (802.1x Ack timeout)
CLI (Command Line Interface) Supported
802.1x RADIUS Supplicant (CB Mode)
Multiple SSID (4 SSID), BSSID
WDS AP / WDS Bridge / WDS Station
Multicast Supported
VLAN Tagging / VLAN Pass-through
Auto Reboot
Wi-Fi Scheduling
Security
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
Hide SSID in beacons
MAC address ltering, up to 50 eld
Wireless STA (Client) connected list
QoS (Quality of Service)
WMM (Wireless Multimedia)
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on
many factors including environmental conditions, distance between devices, radio interference in the operating
environment, and mix of devices in the network. Features and specications subject to change without notice.
Trademarks and registered trademarks are the property of their respective owners. For United States of
America: Copyright © 2013 EnGenius Technologies, Inc. All rights reserved. v1 02202013
ENVIRONMENT & MECHANICAL
Temperature Range
Operating -20°C~70°C / -4°F~158°F
Storage -30°C to 80°C / -22°F to 176°F
Humidity (non-condensing)
0% ~ 90% typical
Weights & Measures
ENS202EXT Device
Weight: 0.7 Ibs.
Width: 3.9”
Length: 7.3”
Height: 1.14”
Packaging
Weight: 1.6 Ibs.
Width: 2.8”
Length: 12.2”
Height: 9.2”
Package Contents
ENS200EXT Access Point
Power Adapter
PoE Injector (EPE1212)
Pole Mount set
Screw Set
Quick Start Guide
Technical Support Card