Operation Manual

INSTALLATION INSTALLING THE DEVICE
2-3
2. Insert an Ethernet cable into the RJ-45 port labeled LAN
(PoE) on the ENS202EXT.
3. Plug the other end of the Ethernet cable into the PoE port
of the PoE injector.
4. Remove the power cord and PoE injector from the box
and plug the power cord into the DC port of the PoE injec-
tor.
5. Plug another Ethernet cable into the LAN port of the PoE
injector and connect the other end of Ethernet cable to
the LAN port of the PC.
Figure 2-2: Installing the ENS202EXT
6. Attach and secure the two antennas to the top of the
ENS202EXT.
CAUTION!
ONLY USE THE POWER ADAPTER SUPPLIED WITH THE
ENS202EXT.
USING A DIFFERENT POWER ADAPTER MIGHT
DAMAGE THE ENS202EXT.
!
PoE
LAN