Manualshelf

User's Manual

ManualsBrandsEnGenius ManualsComputers & AccessoriesOutdoor Long Range Wireless Access Point
21222324252627282930
1. Connectone endof the Ethernet cableinto the LAN port
(PoE) of the AP/ Bridge and the other end to the PoE
port on the PoE adapter.
2. Connect the Power cord with the PoE Adapter and plug
the other end into an electrical outlet.
3. Connect the second Ethernet cable into the LAN port of
the PoE adapter and the other end to the Ethernet port
on the computer.
4. Screwon the providedantennasto the top of thisdevice.
Note: The AP/Bridge should ONLY be powered via
Ethernet cable connected to the includedPoE Adapter.
This diagramdepicts the hardware configuration.
Note: The AP/Bridge should ONLY be powered via
Ethernet cable connected to the includedPoE Adapter.
Hardware Installation
ENS500-ACv2/ENS500EXT-ACv2
21