User's Manual

To attach the ENS500-ACv2/ENS500EXT-ACv2

to a wall using wall mounting kit.

A. Determine where the Access Point to be placed and

stick the Adhesive label on the surface.

B. Use the appropriate drill bit to drill two 8.1mm

diagramand26mmdepth holes on the markingsof the

label.

C. Removethe label andscrewthe anchorsunto the holes

until they areflush with the wall.

D. Screw the included screws into the anchors. Place the

AccessPointagainstwallwiththe mountingscrewheads.

To attach the ENS500EXT-ACv2 to a pole using

the provided pole mounting kit:

A. Thread the open end of the Pole Strapthrough the two

tabs on the Pole Mount Bracket.

B.Lockandtighten PoleStrapto securePoleMountBracket

to thepole.